Triton TritonNav Manual do Utilizador descarregar pdf (Página 64)

An Example of Survey Planning in DelphNav Using Delph Nav

58 CHAPTER 1: Using DelphNav™ (Survey Control Panel) 2004.06.28

13.In the Projection Settings dialog box, click OK (either with or without doing Test).

After a few seconds of processing, DelphNav converts the DXF file, at which time the

following dialog box appears:

FIGURE 35. Layer-insertion dialog box prompting

By default the layer name will be the same as the DXF file name. In Figure 35 we have

changed portland to portland_coast. (This refinement of a name change is

optional; we chose to give it a new name for added clarity, to make it distinct from the

project name.) Note that the data from the DXF file are now referred as a “layer.”

14.Click

OK.

After another brief pause, the imported file should appear. Figure 36 shows the worked

example at this stage of processing.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 83 84

Sem comentários

Triton TritonNav Manual do Utilizador Página 64